| |
|
|
|
EXPLOSIONPROOF CCTV CAMERA EEx
d IIC
T6
UNDERWATER VERSION TO 30 METRES DEPTH |
|
 |
 |
Sapphire Window |
|
ATEX certified |
EEx d IIC T6
 0518
 II 2 D G
Sira 02ATEX1271X |
|
Underwater to 30m |
|
Compact size allowing installation in all locations |
|
Sealed to IP67 |
|
Corrosion resistant stainless steel housing |
|
High resolution high sensitivity CCD sensor |
|
No image burn no adjustments |
|
Auto iris for day to night operation |
|
Easily installed by untrained personnel |
|
Fully adjustable mounting base |
With an overall diameter of just 50mm and a length of 80mm, the T102C is both compact and easy to integrate, featuring standard
video outputs and 24v dc operation. Constructed in stainless steel and featuring a sapphire window, the T102C is sealed to IP66 and
is therefore suitable for use in a range of arduous applications including; safety, security and process monitoring.
|
|
| SPECIFICATION |
|
| |
Specification |
Units |
Min |
Max |
| |
Supply Voltage Range |
V |
19 |
32 |
| |
Supply Reverse Protection |
V |
- |
-36 |
| |
Supply Over Voltage Protection |
V |
- |
36 |
| |
Supply Power Consumption |
mW |
- |
1200 |
| |
Video Signal Output (coax) |
Vpp |
1 |
Composite into 75R |
| |
Over Voltage Protection |
V |
|
36 |
| |
Video Sensor |
- |
Full colour 1/4” DSP colour CCD |
| |
Horizontal Resolution |
Lines |
- |
380 |
| |
Picture Element (Pixels) |
Pixels |
N: 290K P: 320K |
- |
| |
Light Sensitivity |
Lux |
0.5 Lux F2 |
- |
| |
Signal to Noise Ratio |
dB |
50 |
- |
| |
Focus |
|
Fixed |
|
| |
Iris |
Sec |
Automatic 1/50,1/60,-1/100000 |
|
| |
Housing Construction |
- |
Stainless Steel 316L, Sapphire Window |
| |
Dimensions |
mm |
50mm Dia x 80mm |
|
| |
Weight |
kg |
- |
0.5 |
| |
Ingress Protection |
IP |
- |
67 |
| |
Operating Temperature Range |
 C |
-20 |
50 |
| |
Operating Humidity Range |
%RH |
0 |
99 |
| |
Connections
|
|
Made in junction box
|
|
|
TOCSIN 102C
Hazardous Area Cameras & Accessories |
|
| |
Camera Part Number |
Lens Option ( f ) |
Accessory |
Part Number |
| |
5121901 |
2.9mm |
Universal Mounting Bracket |
5078701 |
| |
5114901 |
3.6mm |
Junction Box |
5045801 |
| |
5122001 |
4.3mm |
Anti-Glare Shield |
5126001 |
| |
5122101 |
6.0mm |
Air Blow Adapter |
5127001 |
| |
5122201 |
8.0mm |
|
|
| |
5122301 |
12.0mm |
|
|
| |
5122401
|
16.0mm
|
|
|
| CAMERA LENS SELECTION |
|
The standard camera lens option is 3.6mm and will cover the majority of applications. It is advisable for a new application to check that the standard 3.6mm lens option is correct. Normally with a fixed format camera there will be a specific item or area that is under surveillance. The lens option is calculated from having a rough idea of the height or width of this object and its proposed distance from the camera. The following formulas can then be applied for selection. It must be remembered that with any camera there is only a certain resolution available when viewed on the monitor. It is therefore important that the area of importance to be viewed makes maximum use of that resolution. The lens options listed can also be factory set for a particular ‘best picture’ distance for a given depth of field. Applications should be referred to Seagull Safety for advice on selection for best performance.
|
| For Known Object Height |
| f = 2.4 x distance to object / height of object |
| Camera is to be mounted 8M from an object 2.2M high |
| f = 2.4 x 8 / 2.2 = 8.7 Nearest Lens Option p/n 5122201 (f8.0) |
| For Known Object Width |
| f = 3.4 x distance to object / width of object |
| Camera is to be mounted 7M from an object 6.5M wide |
f = 3.4 x 7 / 6.5 = 3.7 Nearest Lens Option p/n 5114901 (f3.6)
|
|
| ANTI-GLARE SHIELD |
|
The Anti-Glare shield is used where high levels of incident light
cause glare problems on the CCTV image.
|
 |
|
